R803 Amino Box PBTV Remote

Power & Volume

• Start with the TV turned on.
• Press the TV button and the OK button simultaneously for 3 seconds. The TV LED will turn on.
• Press the CH+ or CH- button one step at a time or keep it pressed. The remote will issue a series of Power ON/OFF commands. Release the CH+ or CH- button as soon as the TV turns off.

If you do not press either the CH+ or CH- buttons within 20 seconds, the TV LED will turn off and exit the set-up mode and you will need to start over.

• Press the same TV button used to store the code. The TV LED will blink twice to confirm that the code has been stored.
• You can verify that you selected the correct code by pressing the POWER button again. The TV should either turn on or off.

Additional Amino Remote Control Setup and Troubleshooting

• Remote Control is Not Responding
• Recording PBTV with Your VCR
• Printable Instructions for All PBTV Remotes