SRC-200 Residential Gateway PBTV Remote

Power and Volume

• Start with the TV turned on.
• Press the MUTE button until the light on the remote flashes rapidly.
• Press the POWER button once. The light will light up and remain solid.
• Press the UP ARROW button slowly and repeatedly to scan through all TV codes. When you reach the correct code, the TV will automatically turn off. Note that the light will flash rapidly once you have scanned through all of the TV codes.
• As soon as the TV shuts off, press the SELECT button to store the TV code. The light flashes rapidly then stops, indicating that the TV code has been stored.

finding Your 3 Digit Gatway ID

This will only work on your TV that is set to the Channel 3 video stream.

• Press and hold B button on the channel 3 remote until it starts to blink.
• Press FAV button and the gateway ID will appear on screen.

Setting Your Gateway ID

• Press B key and hold it down until the light flashes rapidly.
• Press 7 8 9
• Enter the 3 digit gateway id number.
  

Setting the Stream

• Press and hold the A button until the light starts to blink.
• Press 7 8 9
• Enter stream number.

Remote Control ID	Operates TV
0	Your TV and Gateway are in the same room and TV is on channel 3
1	Your TV operates on channel 3 and Gateway is in another room
2	Your TV operates on channel 10
3	Your TV operates on channel 13

Additional Residential Gateway Remote Control Setup and Troubleshooting

• Remote Control is Not Responding
• Recording PBTV with Your VCR
• Setting up TIVO with PBTV
• Printable Instructions for All PBTV Remotes